NBS KBKL 20-PP linear bearings

Fatigue load limit Pu:39 kN; B:45 mm; ra max.:1 mm; Basic static load rating C0:335 kN; d:60 mm; Operating clearance factor k2:0.096; d2 ≈:68.7 mm; Basic dynamic load rating C:190 kN; r1,2 min.:1 mm; da min.:64.6 mm;

Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:5070 N; Basic Static Radial Load Rating Co:2360 N; Oil Speed Rating Open/Shielded n2:32000 rpm; d:12.000 mm; Sealed Speed Rating n3:17000 rpm; B:8.00 mm; D:28.0000 mm; Grease Speed Rating Open/Shielded n1:26000 rpm; Accessories:Without Acc

d:69.850 mm; Keyway e:70.9 mm; Grease Speed Rating Max. n1:250 rpm; D:120.7000 mm; Fillet Radius ra:2.00 mm; Keyway f:4.7 mm; Oil Mist Speed Rating Max. n3:250 rpm; Preload:1000 lb; X-L-O Part Number:155-07; B:57.15 mm;

Accessories:Two Shields; d:7.000 mm; B:7.00 mm; Basic Dynamic Radial Load Rating C:3250 N; Grease Speed Rating Open/Shielded n1:36000 rpm; D:22.0000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; Sealed Speed Rating n3:23000 rpm; Basic Static Radial Load Rating Co:1360 N;

A1:203.2 mm; L:749.3 mm; J1:127 mm; Adapter sleeve assembly:SNW 134x5.15/16; P180°:145 kN; P90°:218 kN; Cap bolt recommended tightening torque:271.2 N·m; J max.:635 mm; Taconite seal:TER 140; P150°:120 kN;

Nut for removal:HM 31/530; Mass withdrawal sleeve:66.5 kg; A:9 mm; d:500 mm; Hydraulic nut:HMV 106 E; d1:480 mm; G:Tr 530x6; B1:313 mm; G2:G 1/4; G1:47 mm;

rb max.:2.5 mm; da min.:375 mm; Reference speed:530 r/min; b1:9.4 mm; ra max.:2.5 mm; Limiting speed:670 r/min; d:360 mm; Calculation factor kr:0.25; d1 ≈:404 mm; D:480 mm;

Grease Speed Rating Open/Shielded n1:6000 rpm; B:20.00 mm; Accessories:Without Accessories; Sealed Speed Rating n3:3600 rpm; d:70.000 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:41000 N; Oil Speed Rating Open/Shielded n2:7000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating C

Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:15300 N; Basic Static Radial Load Rating Co:9500 N; D:52.0000 mm; Grease Speed Rating n1:12000 rpm; B:15.00 mm; Oil Speed Rating n2:16000 rpm; d:25.000 mm; Fillet Radius rb:0.60 mm;

G:M 140x2; h:6 mm; b:14 mm; B:28 mm; B3:7 mm; d1:151 mm; Mass lock nut:1.83 kg; d3:180 mm; Axial static load carrying capacity:420 kN; Associated spanner:TMFN 23-30;

Sealed Speed Rating n3:4000 rpm; Oil Speed Rating n2:5300 rpm; Basic Static Radial Load Rating Co:95000 N; B:47.60 mm; D:110.0000 mm; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:4000 rpm; Basic Dynamic Radial Load Rating C:95200 N; d:50.000 mm; Fillet Radius ra:2.00 mm;

Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:143000 N; D:180.0000 mm; B:34.00 mm; Basic Dynamic Radial Load Rating C:153000 N; Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm; d:100.000 mm; Oil Speed Rating n2:4000 rpm;

Oil Speed Rating n2:13000 rpm; D:160.0000 mm; Basic Static Radial Load Rating Co:90000 N; B:26.00 mm; d:105.000 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:9200 rpm; Basic Dynamic Radial Load Rating C:85200 N;

A1:158.75 mm; Stabilizing ring:SR-32-0; Cap bolt:7/8-9 UNC; Initial grease fill:793.8 g; Labyrinth ring:2 x LOR 131; Ca:89.789 mm; P120°:133 kN; PG:1/4 NPT; P180°:145 kN; P90°:207 kN;

Threads per inch:5; Hydraulic nut:HMVC 96E; d3 max.:560.527 mm; d1:457.2 mm; Locking plate:PL 96; G:478.993 mm; Lock nut:N 096; B5:74.6 mm; B:60.579 mm; B1:239.928 mm;